Ford f150 Trucks Ford f150 Trucks
2012 Ford F150 Tail Lights can wear at some point of ownership. If you’re considering upgrading the tail lights in your 2012 Ford F150, you should be aware of some of the most common problems that can occur. In this article, you’ll learn about how to fix a burnt out tail light bulb and what to do if you damage the tail light assembly. You’ll also learn how to upgrade to LED tail lights and keep other drivers aware of your movements.
Changing 2012 Ford F150 Tail Lights
If you notice a burnt out taillight bulb in your 2012 Ford F-150, you can easily and cheaply fix the problem. A burnt out taillight bulb is one of the most common reasons police pull you over, so it’s important to know how to replace it.
First, check to make sure there isn’t a problem with your ground or headlight switches. This can cause your lights to dim or even fail. You can also check to see if your brake light is functioning properly, since this is the part that alerts other drivers that your truck is slowing down.
Next, remove the rear cover from the taillight assembly. There are two screws to loosen. Before you start removing the parts, make sure you wear gloves. They will protect you from oils on your hands and glass breakage.
After you have removed the parts, you may need to wipe the sockets clean. This will ensure that you don’t get a rusty bulb in your new assembly. For best results, you should also use WD-40 to help keep the sockets from corroding.
The same bulb can be used for the taillight and brake light in most European cars. However, if you have a newer car, replacing the 2012 Ford F150 Tail Lights can be trickier.
To replace the taillight bulb, you will need to replace the plastic housing, the wires, the taillight bulb, and the connector. It’s also a good idea to make sure the bulb is a good match for your vehicle.
Once you have the parts, it’s time to change the bulb. Be sure to check the manufacturer’s recommendations, as each car is different. You can also buy replacement bulbs from auto parts stores.
Generally, it’s recommended to replace the taillight bulb every few years. Changing a burnt out bulb can restore the function of your taillight and brighten up the interior. In addition, it’s a good safety measure to install a spare bulb, just in case.
As with any automotive repair job, it’s also a good idea to have a friend test the bulb before you tighten the screws.
Upgrade to LED taillights
If you have a 2012 Ford F150 Tail Lights, you can easily improve the look and functionality of your vehicle with a headlight upgrade. You can purchase LED headlight bulbs that are plug and play and give your truck a brighter look. These upgrades also provide extra brightness for driving in a dark area, such as at night. The headlight bulbs will also make it easier for other drivers to see you.
You can also consider upgrading your F150’s taillights. These lights are relatively inexpensive and easy to install. Plus, they’re available in a variety of different styles. They can be similar to the stock ones, or completely different. There are even colorful options, such as red, white, and clear lenses.
Several companies offer different types of aftermarket taillights for the F-150. Some offer sleek, blacked-out designs, while others are available in chrome or red. A few brands are more popular than others, such as Spyder, Morimoto, and Anzo.
Some aftermarket lights come with water protection. You can also find taillights with smoked lenses.
If you have an older 2012 Ford F150 Tail Lights, you may want to check out the new generation of projector headlights. These lights have better performance than the stock lights and allow you to see far out in the distance. Another benefit is that they don’t produce glare.
In addition to offering a modern appearance, these upgrades are extremely durable. They’re built to last and offer an excellent warranty. Additionally, you can choose between white or amber DRL options.
The XB Tail lights are designed for US-spec cars and come in a polycarbonate lens with an injection-molded ABS housing. This makes them lightweight, durable, and stronger than other alternatives. However, they’re not compatible with OEM LED tail lights. So, if you are considering a complete LED upgrade, you might need to go with another brand.
Before you buy LED lights, make sure to consider your budget. Many LEDs are relatively expensive, and it’s best to go for a high-quality bulb that will provide you with a brighter output.
While some vehicles cannot be upgraded with an LED power level module, you can correct hyperblinking turn signals by installing an LED resistor. This is a simple modification that will fool your vehicle into thinking that the headlight bulb is good, and not faulty.
Damage to the tail light assembly
There are several problems that can occur with a 2012 Ford F150 Tail Lights. These can include a broken light bulb, a bad seal, or even water entering the vehicle. This can create a dangerous driving environment at night. It can also cause police stops. If you suspect any of these issues, the first thing you should do is to inspect the tail light assembly.
One of the most common causes for a tail light to stay on is a broken brake light switch. You may be able to find out if your brakes are working or not by checking the plunger against the pedal arm.
Another problem that can happen is condensation building inside the tail light. Water accumulating in the housing can cause the LED lamps to burn out prematurely. The leak will need to be repaired. When this happens, the outer cover will need to be replaced.
A broken gasket is another potential source of a leak. To repair this issue, you will need to use waterproof silicone to apply it to the cracks. Once you have worked the silicone into the cracks, you will need to let it harden overnight.
If you have a lot of miles on your car, the sun can also damage the tail light covers. However, the mileage doesn’t affect the amount of wear and tear that it will have. In general, the replacement will need to be done after about ten years.
You can prevent tail light issues from happening in the future by taking care of them. A faulty tail light cover will reduce the brightness of your tail lights and make it difficult to see. Also, debris can get into the covers.
Getting your tail light repair done right can save you from paying fines or getting a traffic ticket. Follow the instructions and precautions outlined in your service manual.
Whether you need to replace your 2012 Ford F150 Tail Lights or simply check it for wear, you can find the information you need online. You can even watch a video to give you a better understanding of the process.