2011 Ford F150 Key Fob Re-Programming

 

2011 ford f150 key fob
image source : bing.com

2011 Ford F150 Key Fob was designed with a keyless entry system. This system allows drivers to unlock, lock and start the vehicle with a wireless remote control. When the remote is not working, or has lost its pre-programmed settings, it needs to be re-programmed.

What is needed to Re-program a 2011 Ford F150 Key Fob?

To re-program key fob, you need a working key fob and the keyless entry code. The keyless entry code can be found in the owner’s manual or on a sticker located in the glove box. If the code is not available, it can be retrieved from the dealership. Make sure the battery in the key fob is good before attempting to re-program.

How to Re-program the Key Fob

To re-program the key fob, use the following steps:

  • Place the key in the ignition and turn it to the “On” position.
  • Press and hold the “Unlock” and “Lock” buttons at the same time for 15 seconds.
  • The horn will sound twice, indicating that the vehicle is ready to enter the keyless entry code.
  • Press the “Unlock” button and release. Then press the “Lock” button and release.
  • Enter the four-digit keyless entry code.
  • The horn will sound three times, indicating that the key fob has been successfully re-programmed.

Once the key fob has been re-programmed, it should work as intended. The key fob will be able to lock, unlock and start the vehicle as it was designed to do.

Conclusion

Re-programming the 2011 Ford F150 Key Fob is a relatively simple process. It requires a good working key fob, the keyless entry code, and a few simple steps. Once the steps are followed, the key fob should work as intended.

Related Posts:

Copyright 2024 Ford f150 Trucks